View LTN160AT01-A02_7760020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

???1a?e?t1??? samsung tel: 0755-29555810 0755-36926300 fax: 0755-29555810 e-mail: fpd31@163.com zhoufeng.419@163.com website: http://www.rlofpd.com add: ??e?a????a??1??a1201 lt160at01-a www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 1 01-p01-s-080808 samsung secret pi to date : regional : aug. 8, 2008. samsung tft-lcd model no. : LTN160AT01-A02 samsung tft-lcd model no. : LTN160AT01-A02 the information described in this spec is preliminary and can be changed without prior notice note : extension code [ -a02 ] LTN160AT01-A02 surface type [ glare ] samsung electronics co., ltd. prepared by : lcd mobile division, application engineering part approved by : www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 2 01-p01-s-080808 samsung secret pi contents revision history general description 1. absolute maximum ratings 1.1 absolute ratings of environment 1.2 electrical absolute ratings 2. optical characteristics 3. electrical characteristics 3.1 tft lcd module 3.2 backlight unit 3.3 inverter 4. block diagram 4.1 tft lcd module 4.2 backlight unit 4.3 inverter unit 5. input terminal pin assignment 5.1 input signal & power 5.2 lvds interface 5.3 backlight unit 5.4 timing diagrams of lvds for transmitting 5.5 input signals, basic display colors and gray sc ale of each color. 5.6 pixel format 5.7 dvr address 6. interface timing 6.1 timing parameters 6.2 timing diagrams of interface signal 6.3 power on/off sequence 7. outline dimension 8. packing 9. marking & others 10. general precaution 11. edid - - - - - - - - - - - - - - - - - - - ( 3 ) - - - - - - - - - - - - - - - - - - - ( 4 ) - - - - - - - - - - - - - - - - - - - ( 5 ) - - - - - - - - - - - - - - - - - - - ( 7 ) - - - - - - - - - - - - - - - - - - - ( 10 ) - - - - - - - - - - - - - - - - - - - ( 13 ) - - - - - - - - - - - - - - - - - - - ( 15 ) -- - - - - - - - - - - - - - - - - - - ( 20 ) -- - - - - - - - - - - - - - - - - - - ( 22 ) -- - - - - - - - - - - - - - - ---- -- ( 24 ) --- - - - - - - - - - - - - - - - -- - ( 25 ) --- - - - - - - - - - - - - - - - - - ( 27 ) --- - - - - - - - - - - - - - - - - - ( 29 ) www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 3 01-p01-s-080808 samsung secret pi revision history revision history LTN160AT01-A02 model preliminary spec was issued fi rst. all p00 aug8.2008 summary page revision no. date www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 4 01-p01-s-080808 samsung secret pi general description description ltn160at02-n01 is a color active matrix tft (thin f ilm transistor) liquid crystal display (lcd) that uses amorphous silicon tft as switching devices. this model is composed of a tft lcd panel, a driver circuit and a backligh t unit. the resolution of a 16.0" contains 1366 x 768 pixels and can display up to 262,144 col ors. 6 o'clock direction is the optimum viewing angle. applications ? notebook pc ? if the usage of this product is not for pc applica tion, but for others, please contact sec general information features ? high contrast ratio, high aperture structure ? 1366 x 768 pixels resolution (16:9) ? color gamut (typical 45%) ? viewing angle ( h90 / v60) ? low power consumption ? fast response time ? single ccfl ?de(data enable) only mode ? 3.3v lvds interface ? onboard eedid chip ? rohs compliance mm 0.5 glass thickness haze 0, hardness 3h surface treatment normally white display mode mm 0.25875 (h) x 0.25875 (v) (typ.) pixel pitch rgb vertical stripe pixel arrangement 16 : 9 pixel 1366 x 768 number of pixel 262,144 display colors a-si tft active matrix driver element mm 353.45 (h) x 198.72(v) ( 16.0 diagonal ) display area note unit specification item www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 5 01-p01-s-080808 samsung secret pi 1. absolute maximum ratings 1.1 environmental absolute ratings mechanical information note (1) temperature and relative humidity range are shown in the figure below. 95 % rh max. (40 c 3 ta) maximum wet - bulb temperature at 39 o c or less. (ta > 40 c ) no condensation (2) 2ms, half sine wave, one time for x, y, z. (3) 5 - 500 hz, random vibration, 30min for x, y, z . (4) at testing vibration and shock, the fixture in holding the module to be tested have to be hard and rigid enough so that the module would not be twisted or bent by the fixture. (5) if product is used for extended time excessivel y or exposed to high temperatures for extended time , there is a possibility of wide viewing angle film d amage which could affect visual characteristics . 0 20 40 60 80 100 -40 -20 0 20 40 60 80 5 90 operating range storage range relative humidity ( %rh) temperature ( o c) 545 6.5 214.5 365.5 max. g 530 - weight (1) mm 6.2 - depth (d) mm 214.0 213.5 vertical (v) mm 365.0 364.5 horizontal (h) module size note unit typ. min. item (3),(4) g 2.41 - vnop vibration (non-operating) (2),(4) g 240 - snop shock ( non-operating ) (1),(5) c 50 0 topr operating temperate (temperature of glass surface) (1),(5) c 60 -20 tstg storage temperate note unit max. min. symbol item ( 40,90 ) ( 50,50.4 ) ( 60,27.7 ) note (1) measurement condition of outline dimensio n . equipment : vernier calipers . push force : 500g f (minimum) www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 6 01-p01-s-080808 samsung secret pi (2) back-light unit note 1) permanent damage to the device may occur if maximum values are exceeded functional operation should be restricted to the co nditions described under normal operating condition s. ta = 25 2 c (1) khz 80 40 f l lamp frequency (1) marms 7.0 3.0 i l lamp current note unit max. min. symbol item 1.2 electrical absolute ratings (1) tft lcd module note (1) within ta (25 2 c ) v dd =3.3v, v ss = gnd = 0v (1) v v dd + 0.3 v dd - 0.3 v dd power supply voltage (1) v v dd + 0.3 v dd - 0.3 v in logic input voltage note unit max. min. symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 7 01-p01-s-080808 samsung secret pi 2. optical characteristics the following items are measured under stable condi tions. the optical characteristics should be measured in a dark room or equivalent sta te with the methods shown in note (5). measuring equipment : topcon sr-3 * ta = 25 2 c, v dd =3.3v, fv= 60hz, f dclk = (72.33)mhz, i l = 6.0 ma - degrees - cd/m 2 msec - unit (6) 1.7 - - d l 13 points white variation - 30 25 f l - 15 10 f h ver. - 45 40 q h (1), (5) bm-5a - 45 40 cr 3 10 q l hor. viewing angle 0.359 0.329 0.299 w y 0.343 0.313 0.283 w x white 0.110 0.080 0.050 b y 0.175 0.145 0.115 b x blue 0.600 0.570 0.540 g y 0.330 0.300 0.270 g x green 0.355 0.325 0.295 r y (1), (5) pr-650 0.645 0.615 0.585 r x red color chromaticity ( cie ) i l =6.0ma (1), (4) - 220 190 y l , ave average luminance of white (center) (1), (3) 16 8 - t rt response time at ta ( rising + falling ) (1), (2), (5) - 600 300 normal viewing angle f = 0 q = 0 cr contrast ratio (5 points) note max typ. min. condition symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 8 01-p01-s-080808 samsung secret pi note 3) definition of response time : note 1) definition of viewing angle : viewing angl e range(10 c/r) note 4) definition of average luminance of white : measure the luminance of white at 5 points. 6 oclock direction normal line q l q r f h f l 12 oclock direction q r =90 o q l =90 o f = 0 o , x x' y' y q = 0 o f h = 90 o f l = 90 o display data black(tft on) white(tft off) white(tft off) optical response 100% 90% 10% 0% t r t f time cr = cr(4) + cr(5) + cr(7) + cr(9) + cr(10) note 2) definition of contrast ratio (cr) : rati o of gray max (gmax) ,gray min (gmin) at 5 points(4, 5, 7, 9, 10) 5 points : , , , , at the figure of note (6). 4 9 10 7 5 : test point www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 9 01-p01-s-080808 samsung secret pi [ optical characteristics measurement setup ] center of the screen tft-lcd module lcd panel photo-detector ( topcon sr3 ) 50 cm field = 2 note 5) after stabilizing and leaving the panel a lone at a given temperature for 30 min , the measur ement should be executed. measurement should be executed in a stable, windless,and dark room. 30 min after lighting the backlight. this should be measured in the center of screen. lamp current : 6.0ma ( inverter : sic-130t ) environment condition : ta = 25 2 c maximum luminance of 13 points minimum luminance of 13 points : test point 342 683 1024 192 384 576 (lines) 10mm 10mm 10mm 10mm 4 2 5 3 6 8 10 9 13 12 11 1 7 note 6) definition of 13 points white variation ( d l ), cr variation( c ver ) [ ~ ] 1 13 d l = www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 10 01-p01-s-080808 samsung secret pi 3. electrical characteristics 3.1 tft lcd module note (1) display data pins and timing signal pins should be connected.( gnd = 0v ) (2) f v = 60hz, f dclk = 72.33mhz, v dd = 3.3v , dc current. (3) power dissipation pattern *a) white pattern *b) mosaic pattern display brightest gray level display darkest gray level view area ta= 25 2 c (4) a 2.0 - - i rush rush current (2),(3)*c ma 650 600 - v. stripe (2),(3)*b ma - 480 - mosaic (2),(3)*a ma - 410 - i dd white current of power supply mhz 73.7 72.33 70.9 f dclk main frequency khz - 47.4 - f h hsync frequency hz - 60 - fv vsync frequency mv - - -100 v il low v cm = +1.2v mv +100 - - v ih high differential input voltage for lvds receiver threshold v 3.6 3.3 3.0 v dd voltage of power supply note unit max. typ. min. symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 11 01-p01-s-080808 samsung secret pi *c) 1dot vertical stripe pattern 4) rush current measurement condition v dd rising time is 470us 3.3v gnd 0.9v dd 0.1v dd 470us 3.3v 12v v dd ( lcd input) control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf r g b r g b r g b r g g b r g b r g b r g r g b r g b r g b r g g b r g b r g b r g rr www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 12 01-p01-s-080808 samsung secret pi 3.2 back-light unit (2) lamp frequency may produce interference with h orizontal synchronous frequency and this may cause line flow on the display. therefore lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. (3) refer to i l v l to calculate. (4) life time (hr) of a lamp can be defined as the time in which it continues to operate under the condition ta= 25 2 c and i l = 6.0 ma rms until one of the following event occurs. 1. when the brightness becomes 50% or lower than th e original. 2. when the effective ignition length becomes 80% o r lower than the original value. (effective ignition length is defined as an area th at has less than 70% brightness compared to the brightness in the center point.) (5) the inverter open voltage - this voltage should be measured after ballast capacitor- have to be larg er than the lamp startup voltage, otherwise backlight may has blinking for a moment after turns on or not be turned on. if an inverter has shutdown function it should kee p its open voltage for longer than 1 second even if lamp connector open. note) the waveform of the inverter output voltage must be area symmetric and the design of the inverter must have specifications for the modulariz ed lamp. the performance of the backlight, for example life time or brightness, is much influenced by the characteristics of the dc-ac inverter for the lamp . so all the parameters of an inverter should be c arefully designed so as not to produce too much leakage cur rent from high-voltage output of the inverter. when you design or order the inverter, please make sure that a poor lighting caused by the mismatch of the backlight and the inverter(miss lighting, flick er, etc.) never occur. when you confirm it, the mo dule should be operated in the same condition as it is i nstalled in your instrument. note (1) lamp current is measured with a high freque ncy current meter as shown below. ta= 25 2 c the backlight system is an edge-lighting type with a single ccfl ( cold cathode fluorescent lamp ). the characteristics of a single lamp are shown in t he following tables. - inverter : (sem sic 130t) lcd module 1 2 a inverter hot : pink cold : white (sic-130t) 0 c, (5) vrms 1,540 25 c, (5) vrms 1,230 - - v s startup voltage (5) sec 1.0 - - lamp startup time (4) hour 12,000 hr operating life time (3) i l =6.0ma w (4.5) p l power consumption (2) khz 80 - 40 f l frequency i l =6.0ma vrms - 710 - v l lamp voltage (1) marms 6.5 6.0 3.0 i l lamp current note unit max. typ. min. symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 13 01-p01-s-080808 samsung secret pi 4. block diagram 4.1 tft lcd module 4.2 back-light unit note ) the output of the inverter may change according t o the material of the reflector. cold(white) lamp hot (pink) 1 2 reflector input- lvds input/rsds output timing controller 16.0 hd (1366*3*768) tft-lcd panel source driver ic gate driver ic dc-dc converter control signal vcom gamma dvdd avdd von/voff video signal gamma generator connector fi-xb30s-hf10 or compatible lvds vcom generator source pcb rsds edid eeprom i 2 c bus www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 14 01-p01-s-080808 samsung secret pi 5. input terminal pin assignment 5.1. input signal & power (lvds, connector : uju i s100-l30r-c15, mating connector : jae fi-x30m or compatible) pin no symbol polarity remark 12 3 4 5 6 7 89 10 11 12 13 14 15 16 17 18 19 20 vss vdd veedid nc nc nc rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclk- rxclk+ ground ddc 3.3v power no connection function power supply +3.3v no connection lvds differential data input (r0-r5,g0) lvds differential data input (r0-r5,g0) lvds differential data input (g1-g5,b0-b1) lvds differential data input (g1-g5,b0-b1) lvds differential data input (b2-b5,sync,de) lvds differential data input (b2-b5,sync,de) lvds differential data input (clock) lvds differential data input (clock) negative positive negative positive negative positive negative positive 21 22 23 24 25 26 27 28 29 30 vdd power supply +3.3v vss ground vss ground vss ground vss ground clkedid ddc clock dataedid ddc data vss gnd nc no connection nc no connection vss gnd nc no connection nc no connection vss gnd nc no connection nc no connection no connection www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 15 01-p01-s-080808 samsung secret pi clock txclkin 26 g4 txin10 10 de txin20 25 g3 txin9 9 vsync txin19 23 g2 txin8 7 hsync txin18 22 g1 txin7 6 b5 txin17 20 g0 txin6 4 b4 txin16 19 r5 txin5 3 b3 txin15 18 r4 txin4 1 b2 txin14 16 r3 txin3 48 b1 txin13 15 r2 txin2 47 b0 txin12 13 r1 txin1 45 g5 txin11 12 r0 txin0 44 rgb signal name pin no. rgb signal name pin no. 5.2 lvds interface : transmitter sn75lvds86 or com patible graphics controller 18-bit sn75lvds86 lvds+i/f ic red0 red1 red2 red3 red4 red5 green0 hsync enable green1 green2 green3 green4 green5 blue0 blue1 blue2 blue3 blue4 blue5 vsync clock txin0 txin1 txin2 txin3 txin4 txin5 txin6 txin7 txin8 txin9 txin10 txin11 txin12 txin13 txin14 txin15 txin16 txin17 txin18 txin19 txin20 txclkin 56 8 9 11 12 14 15 3 45 6 78 9 10 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ 100 w 100 w 100 w 100 w lvds interface is100-l30r-c15 note : the lcd module uses a 100ohm resistor betwee n positive and negative lines of each receiver input. www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 16 01-p01-s-080808 samsung secret pi 5.3 back light unit connector : jst bhsr - 02vs -1 mating connector : sm02b-bhss-1(jst) 5.4 timing diagrams of lvds for transmission lvds receiver : integrated t-con txin20 txin19 txin17 txin18 txin16 txin15 txin14 txin13 txin12 txin10 txin11 txin9 txin8 txin7 txin6 txin5 txin3 txin4 txin2 txin1 txin0 t t/7 vsync b2 hsync b5 b3 b4 g4 b1 g5 b0 g3 g2 g1 g0 r4 r5 r2 r1 r0 o_txclk out 0_rxclk in o_rxin1 o_rxin0 o_rxin2 de r3 low voltage white cold 2 high voltage pink hot 1 function color symbol pin no. www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 17 01-p01-s-080808 samsung secret pi 5.5 input signals, basic display colors and gray s cale of each color note 1) definition of gray : rn: red gray, gn: green gray, bn: blue gray (n=gray level) note 2)input signal: 0 =low level voltage, 1=high l evel voltage b3 ~ b60 : : : : : : : : : : : : : : : : : : : b2 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 - b1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 dark b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g61 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : g3 ~ g60 : : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 - g1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 dark g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of green b63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue b62 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 light b61 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : g63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green g62 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 light r63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red r62 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 light r61 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : : r3 ~ r60 : : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 - r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green - 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colors b5 45 b3 b2 b1 b0 g5 g4 g3 g2 g1 g0 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display color www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 18 01-p01-s-080808 samsung secret pi 5.6 pixel format in the display r g b r g b pixel 1 r g b r g b r g b r g b r g b r g b LTN160AT01-A02 panel line 1 line 768 pixel 1366 www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 19 01-p01-s-080808 samsung secret pi 6. interface timing 6.1 timing parameters 6.2 timing diagrams of interface signal clocks - 1366 - thd display period horizontal active display term clocks 1550 1526 1436 th cycle one line scanning time lines - 768 - tvd display period vertical active display term lines 974 790 772 tv cycle frame frequency note unit max. typ. min. symbol item signal t vd t v de t h t c t hd valid display data (1366 clocks ) dclk de data signals www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 20 01-p01-s-080808 samsung secret pi 6.3 power on/off sequence : to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. note. (1) the supply voltage of the external system for t he module input should be the same as the definition of v dd . (2) apply the lamp voltage within the lcd operation range. when the back-light turns on before the lcd operation or the lcd turns off befor e the back-light turns off, the display may momentarily become white. (3) in case of v dd = off level, please keep the level of input signals on the low or keep a high impedance. (4) t4 should be measured after the module has bee n fully discharged between power off and on period. (5) interface signal shall not be kept at high impe dance when the power is on. power supply v dd 0.9 v dd 0.9 v dd 0v 0 v valid signals t 3 0 < << < t 1 10 msec 0 < << < t 2 50 msec 0 < << < t 3 50 msec 500 msec t 4 t 1 t 2 t 4 0.1 v dd 0.1 v dd power on/off sequence back-light 200 msec t 5 200 msec t 6 power on power off t 5 t 6 50% 50% t1 : vdd rising time from 10% to 90% t2 : the time from vdd to valid data at power on. t3 : the time from valid data off to vdd off at pow er off. t4 : vdd off time for windows restart t5 : the time from valid data to b/l enable at powe r on. t6 : the time from valid data off to b/l disable at power off. www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 21 01-p01-s-080808 samsung secret pi 7. mechanical outline dimension [ refer to the next page ] www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 23 01-p01-s-080808 samsung secret pi 8. packing 1. carton(internal package) (1) packing form corrugated cardboard box and corrupad form as sho ck absorber (2) packing method note 1)total weight : approximately 8 kg 2) acceptance number of piling : 10 sets 3) carton size : 376(w) x 326(d) x 404 (h) panel cushion cap cushion pad www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 24 01-p01-s-080808 samsung secret pi (3)packing material 9. markings & others a nameplate bearing followed by is affixed to a shi pped product at the specified location on each product. (1)parts number : ltn160at01 (2)revision code : 3 letters (3)lot number : 6 x x x xx xx xx xxx panel number cell id lot id month year product code line sec revision code 1 set carton 4 2 pcs pictorial marking 3 1 set packing case (inner box) included shock absorber 2 10 pcs static electric protective sack 1 quantity part name no (4) nameplate indication parts name : ltn160at01 lot number : 6xxxxxxxxx inspected work week : 0710(2007 year 10th week) product revision code : a02 40 mm 80 mm ltn160at01 0710 6xxxxxxxx a02 made in china www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 25 01-p01-s-080808 samsung secret pi high voltage caution high voltage caution label high voltage caution risk of electric shock disconnect the electric power before service 10mm 70mm this cover contains fluorescent lamp. please follow local ordinances or regulations for its disposal (6) packing small box attach (7) packing box marking : samsung tft-lcd brand n ame device : ltn160at01 type : a02 quantity : 10 pcs www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 26 01-p01-s-080808 samsung secret pi 10. general precautions 1. handling (a) when the module is assembled, it should be atta ched to the system firmly using every mounting holes. be careful not to twist and bend the modules. (b) refrain from strong mechanical shock and / or a ny force to the module. in addition to damage, this may cause improper operation or damag e to the module and ccft backlight. (c) note that polarizers are very fragile and could be easily damaged. do not press or scratch the surface harder than a hb pencil lead. (d) wipe off water droplets or oil immediately. i f you leave the droplets for a long time, staining and discoloration may occur. (e) if the surface of the polarizer is dirty, cl ean it using some absorbent cotton or soft cloth. (f) the desirable cleaners are water, ipa(isoproph yl alcohol) or hexane. do not use ketone type materials(ex. acetone), ethy l alcohol, toluene, ethyl acid or methyl chloride. it might permanent damage to the polarize r due to chemical reaction. (g) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . in case of contact with hands, legs or clot hes, it must be washed away thoroughly with soap. (h) protect the module from static , it may cause d amage to the c-mos gate array ic. (i) use fingerstalls with soft gloves in order to k eep display clean during the incoming inspection and assembly process. (j) do not disassemble the module. (k) do not pull or fold the lamp wire. (l) do not adjust the variable resistor which is lo cated on the back side. (m) protection film for polarizer on the module s hall be slowly peeled off just before use so that the electrostatic charge can be minimized. (n) pins of i/f connector shall not be touched dire ctly with bare hands. www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 27 01-p01-s-080808 samsung secret pi 2. storage (a) do not leave the module in high temperature, an d high humidity for a long time. it is highly recommended to store the module with t emperature from 0 to 35 c and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunli ght. (c) the module shall be stored in a dark place. it is prohibited to apply sunlight or fluorescent light during the store. 3. operation (a) do not connect,disconnect the module in the power on condition. (b) power supply should always be turned on/off b y following item 6.3 power on/off sequence . (c) module has high frequency circuits. sufficien t suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the backlight connector and its inverter power supply shall be a minimized length and be connected directly . the l onger cable between the backlight and the inverter may cause lower luminance of lamp( ccft) and may require higher startup voltage(vs). (e) the standard limited warranty is only applicabl e when the module is used for general notebook applications. if used for purposes other t han as specified, sec is not to be held reliable for the defective operations. it is s trongly recommended to contact sec to find out fitness for a particular purpose. 4. others (a) ultra-violet ray filter is necessary for outdoo r operation. (b) avoid condensation of water. it may result in i mproper operation or disconnection of electrode. (c) do not exceed the absolute maximum rating value . ( the supply voltage variation, input voltage variation, variation in part contents and environmental temperature, so on) otherwise the module may be damaged. (d) if the module displays the same pattern continu ously for a long period of time,it can be the situation when the image sticks to the screen. (e) this module has its circuitry pcbs on the rear side and should be handled carefully in order not to be stressed. www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 28 01-p01-s-080808 samsung secret pi ltn160at02a02 www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 29 01-p01-s-080808 samsung secret pi www.datasheet.co.kr datasheet pdf - http://www..net/
doc.no. rev.no page / 31 ltn160at01-a 30 01-p01-s-080808 samsung secret pi www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LTN160AT01-A02

	To Download LTN160AT01-A02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .